Cisco SG350-10MP Administration Guide

Smart Network Application (SNA)
SNA Graphics
Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4 465
25
Operations, which do not change the settings of devices, are available regardless of the session
access mode.
SNA uses the same credentials as the web switch management application, and creates an
HTTP management session over which it works. The SNA session counts against the number
of possible concurrent web management sessions for the SNA manager along with active
regular web management sessions.
Session settings can be saved. See Saving SNA Settings.
SNA Graphics
The SNA feature is a graphical representation of the user network. When the main page of the
SNA is opened, the screen is divided into the following parts:
• Topology View
• Right-Hand Information Panel
• Topology Overlays
• Overlays

Cisco SG350-10MP Specifications

General

Model	SG350-10MP
Category	Switch
PoE Budget	130W
Switching Capacity	20 Gbps
Forwarding Rate	14.88 Mpps
Power Supply	Internal
Ports	8 x 10/100/1000 PoE+ + 2 x Gigabit SFP
MAC Address Table Size	16K
Jumbo Frame Support	9216 bytes
Management	Web-based, CLI, SNMP
Operating Temperature	0°C to 45°C (32°F to 113°F)
Storage Temperature	-20°C to 70°C (-4°F to 158°F)
Operating Humidity	10% to 90% relative humidity, non-condensing
Storage Humidity	5% to 95% relative humidity, non-condensing
Dimensions (W x D x H)	279.4 x 170 x 44 mm (11.0 x 6.7 x 1.73 in)