Cisco SG350-10MP Administration Guide

17
Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4 317
Security
This section describes device security and access control. The system handles various types of
security.
The following list of topics describes the various types of security features described in this
section. Some features are used for more than a single type of security or control, and so they
appear twice in the list of topics below.
Permission to administer the device is described in the following sections:
• Configuring TACACS+
• Password Strength
• Management Access Method
• Management Access Authentication
• Key Management
• Secure Sensitive Data Management
• SSL Server
• SSH Server
• SSH Client
Protection from attacks directed at the device CPU is described in the following sections:
• TCP/UDP Services
• Storm Control
• Access Control
Access control of end-users to the network through the device is described in the following
sections:
• Management Access Method
• Configuring TACACS+

Cisco SG350-10MP Specifications

General

Model	SG350-10MP
Category	Switch
PoE Budget	130W
Switching Capacity	20 Gbps
Forwarding Rate	14.88 Mpps
Power Supply	Internal
Ports	8 x 10/100/1000 PoE+ + 2 x Gigabit SFP
MAC Address Table Size	16K
Jumbo Frame Support	9216 bytes
Management	Web-based, CLI, SNMP
Operating Temperature	0°C to 45°C (32°F to 113°F)
Storage Temperature	-20°C to 70°C (-4°F to 158°F)
Operating Humidity	10% to 90% relative humidity, non-condensing
Storage Humidity	5% to 95% relative humidity, non-condensing
Dimensions (W x D x H)	279.4 x 170 x 44 mm (11.0 x 6.7 x 1.73 in)