Cisco SG350-10MP Administration Guide

Smart Network Application (SNA)
Device Authorization Control (DAC)
510 Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4
25
Device Authorization Control (DAC)
Use the Device Authorization Control (DAC) feature to configure a list of authorized client
devices in the network. DAC activates 802.1x features on SNA devices in the network and an
embedded RADIUS server (RADIUS host server) can be configured on one of the SNA
devices. Device authorization is done via MAC authentication.
DAC Workflow
The DAC workflow consists of the following steps:
STEP 1 Activate DAC. See Accessing DAC.
STEP 2 Configure a RADIUS server device and client devices. See Specify a RADIUS Server
and Clients.
STEP 3 Add the client devices to the white list. See DAC List Management.
Accessing DAC
To access DAC, perform the following:
STEP 1 Click the options menu in the left-hand side of the masthead:
The following menu is displayed:
STEP 2 Select Edit DAC Mode.

Cisco SG350-10MP Specifications

General

Model	SG350-10MP
Category	Switch
PoE Budget	130W
Switching Capacity	20 Gbps
Forwarding Rate	14.88 Mpps
Power Supply	Internal
Ports	8 x 10/100/1000 PoE+ + 2 x Gigabit SFP
MAC Address Table Size	16K
Jumbo Frame Support	9216 bytes
Management	Web-based, CLI, SNMP
Operating Temperature	0°C to 45°C (32°F to 113°F)
Storage Temperature	-20°C to 70°C (-4°F to 158°F)
Operating Humidity	10% to 90% relative humidity, non-condensing
Storage Humidity	5% to 95% relative humidity, non-condensing
Dimensions (W x D x H)	279.4 x 170 x 44 mm (11.0 x 6.7 x 1.73 in)