EasyManuals Logo

Cisco SG350-10MP Administration Guide

Cisco SG350-10MP
762 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #192 background imageLoading...
Page #192 background image
Administration: Discovery
Discover - LLDP
Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4 145
9
Auto-Negotiation Enabled—Port speed auto-negotiation active status. The possible
values are True and False.
Auto-Negotiation Advertised Capabilities—Port speed auto-negotiation capabilities,
for example, 1000BASE-T half duplex mode, 100BASE-TX full duplex mode.
Operational MAU Type—Medium Attachment Unit (MAU) type. The MAU performs
physical layer functions, including digital data conversion from the Ethernet interfaces’
collision detection and bit injection into the network; for example, 100BASE-TX full
duplex mode.
802.3 Power via MDI
MDI Power Support Port Class—Advertised power support port class.
PSE MDI Power Support—Indicates if MDI power is supported on the port.
PSE MDI Power State—Indicates if MDI power is enabled on the port.
PSE Power Pair Control Ability—Indicates if power pair control is supported on the
port.
PSE Power Pair—Power pair control type supported on the port.
PSE Power Class—Advertised power class of the port.
Power Type—Type of pod device connected to the port.
Power Source— Port power source.
Power Priority—Port power priority.
PD Requested Power Value—Amount of power requested by the pod device.
PSE Allocated Power Value—Amount of power allocated by the PSE to the PD.
4-Wire Power via MDI
4-Pair PoE Supported—Indicates system and port support enabling the 4-pair wire
(true only for specific ports that have this HW ability).
Spare Pair Detection/Classification Required—Indicates that the 4-pair wire is
needed.
PD Spare Pair Desired State—Indicates a pod device requesting to enable the 4-pair
ability.
PD Spare Pair Operational State—Indicates if the 4-pair ability is enabled or
disabled.

Table of Contents

Other manuals for Cisco SG350-10MP

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco SG350-10MP and is the answer not in the manual?

Cisco SG350-10MP Specifications

General IconGeneral
ModelSG350-10MP
CategorySwitch
PoE Budget130W
Switching Capacity20 Gbps
Forwarding Rate14.88 Mpps
Power SupplyInternal
Ports8 x 10/100/1000 PoE+ + 2 x Gigabit SFP
MAC Address Table Size16K
Jumbo Frame Support9216 bytes
ManagementWeb-based, CLI, SNMP
Operating Temperature0°C to 45°C (32°F to 113°F)
Storage Temperature-20°C to 70°C (-4°F to 158°F)
Operating Humidity10% to 90% relative humidity, non-condensing
Storage Humidity5% to 95% relative humidity, non-condensing
Dimensions (W x D x H)279.4 x 170 x 44 mm (11.0 x 6.7 x 1.73 in)

Related product manuals