EasyManuals Logo

Cisco SG350-10MP Administration Guide

Cisco SG350-10MP
762 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #312 background imageLoading...
Page #312 background image
VLAN Management
Voice VLAN
256 Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4
12
CoS/802.1p —Select a CoS/802.1p value that to be used by LLDP-MED as a voice
network policy. Refer to Administration > Discovery > LLDP > LLDP MED Network
Policy for additional details.
DSCP—Selection of DSCP values that to be used by the LLDP-MED as a voice
network policy. Refer to Administration > Discovery > LLDP > LLDP MED Network
Policy for additional details.
The following Operational Status fields are displayed:
Voice VLAN ID—Voice VLAN.
CoS/802.1p —Value being used by LLDP-MED as a voice network policy. Refer to
Administration > Discovery > LLDP > LLDP MED Network Policy for additional
details.
DSCP—Value being used by the LLDP-MED as a voice network policy.
The following Dynamic Voice VLAN Settings fields are displayed:
Dynamic Voice VLAN—Select this field to disable or enable voice VLAN feature in
one of the following ways:
- Enable Auto Voice VLAN—Enable Dynamic Voice VLAN in Auto Voice VLAN
mode.
- Enable Telephony OUI—Enable Dynamic Voice VLAN in Telephony OUI mode.
- Disable—Disable Auto Voice Vlan or Telephony OUI.
Auto Voice VLAN Activation—If Auto Voice VLAN was enabled, select one of the
following options to activate Auto Voice VLAN:
- Immediate—Auto Voice VLAN on the device is to be activated and put into
operation immediately if enabled.
- By External Voice VLAN Trigger—Auto Voice VLAN on the device is activated and
put into operation only if the device detects a device advertising the voice VLAN.
NOTE Manually re-configuring the voice VLAN ID, CoS/802.1p, and/or DSCP from
their default values results in a static voice VLAN, which has higher priority than auto
voice VLAN that was learned from external sources.
STEP 3 Click Apply. The VLAN properties are written to the Running Configuration file.

Table of Contents

Other manuals for Cisco SG350-10MP

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco SG350-10MP and is the answer not in the manual?

Cisco SG350-10MP Specifications

General IconGeneral
ModelSG350-10MP
CategorySwitch
PoE Budget130W
Switching Capacity20 Gbps
Forwarding Rate14.88 Mpps
Power SupplyInternal
Ports8 x 10/100/1000 PoE+ + 2 x Gigabit SFP
MAC Address Table Size16K
Jumbo Frame Support9216 bytes
ManagementWeb-based, CLI, SNMP
Operating Temperature0°C to 45°C (32°F to 113°F)
Storage Temperature-20°C to 70°C (-4°F to 158°F)
Operating Humidity10% to 90% relative humidity, non-condensing
Storage Humidity5% to 95% relative humidity, non-condensing
Dimensions (W x D x H)279.4 x 170 x 44 mm (11.0 x 6.7 x 1.73 in)

Related product manuals