Cisco SG350-10MP Administration Guide

Security: 802.1X Authentication
Web Authentication Customization
372 Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4
18
To customize the web-authentication pages:
STEP 1 Click Security > 802.1X Authentication > Web Authentication Customization.
This page displays the languages that can be customized.
STEP 2 Click Edit Login Page.
The following page is displayed:
STEP 3 Click Edit labeled 1. The following fields are displayed:
• Language—Displays the page’s language.
• Color Scheme—Select one of the contrast options.
If the Custom color scheme is selected, the following options are available:
- Page Background Color—Enter the ASCII code of the background color. The
selected color is shown in the Text field.
- Page Text Color—Enter the ASCII code of the text color. The selected color is
shown in the Text field.
- Header and Footer Background Color—Enter the ASCII code of the header and
footer background color. The selected color is shown in the Text field.
- Header and Footer Text Color—Enter the ASCII code of the header and footer text
color. The selected color is shown in the Text field.
1
2
3
4
5

Cisco SG350-10MP Specifications

General

Model	SG350-10MP
Category	Switch
PoE Budget	130W
Switching Capacity	20 Gbps
Forwarding Rate	14.88 Mpps
Power Supply	Internal
Ports	8 x 10/100/1000 PoE+ + 2 x Gigabit SFP
MAC Address Table Size	16K
Jumbo Frame Support	9216 bytes
Management	Web-based, CLI, SNMP
Operating Temperature	0°C to 45°C (32°F to 113°F)
Storage Temperature	-20°C to 70°C (-4°F to 158°F)
Operating Humidity	10% to 90% relative humidity, non-condensing
Storage Humidity	5% to 95% relative humidity, non-condensing
Dimensions (W x D x H)	279.4 x 170 x 44 mm (11.0 x 6.7 x 1.73 in)