Chapter 10 Setting up Preferences
10-8 CallConnector Operator
Number Patterns
This section allows you to define the area code and subscriber number format for each country.
The number pattern information is used to format dialed phone numbers into display or
‘canonical’ format numbers.
Country – The country where you reside.
Patterns – The list of all number patterns for your country.
A number pattern must follow these rules:
• Area code must be in-between brackets.
• The Area Code and Subscriber number must be separated by a space.
• Subscriber number can be separated for clarity by space, period or dash.
• If a number does not require an area code, enter the number pattern without
brackets.
Figure: Number Pattern dialog
To Add a Number Pattern
Step 1 On the Number Patterns section, select a country name.
Step 2 Click Add and enter the new number pattern.
Step 3 Click OK to save the change.
To Edit a Number Pattern
Step 1 On the Number Patterns section, select a country name. A list of existing
number patterns for the selected country will be displayed.
Step 2 Select the pattern you want to change.
Step 3 Click Edit and enter the new number pattern.
Step 4 Click OK to save the change.
To Remove a Number Pattern
Step 1 On the Number Patterns section, select a country name. A list of existing
number patterns for the selected country will be displayed.
Step 2 Select the pattern you want to delete and click Remove.
To Next Page
Loading...
