Cisco Small Business Pro - Page 42

Chapter 3 Installation and Configuration
3-4 CallConnector Operator
CallConnector Operator Standalone Installation Parameters
The following information is required during the installation of the CallConnector Operator:
Item
Description
Source
Access to Download
Site or Installation
Software
Download or otherwise obtain the
CallConnector Operator installation
program
Service Provider or Sys-
Admin
Internet Access to
CallConnector
License Server
CallConnector Operator needs to be
registered and activated using the PAK-ID
or Serial Number. The activation requires
Internet access to the CallConnector
License server. You can get started with
an evaluation version if you do not have a
license.
Service Provider or Sys-
Admin
PAK ID
The Product Authorization Key (PAK-ID)
is a number sent with your purchase to
allow you to register the software.
Service Provider or Sys-
Admin
User Name*
User name configured for your IP-Phone
Service Provider or Sys-
Admin
User Password*
Password configured for the user on that
IP-Phone.
Service Provider or Sys-
Admin
IP Address of Cisco
Router
IP Address of the Cisco Router to allow
the CallConnector Operator to connect to
the router
Service Provider or Sys-
Admin
Area Code
The telephone area code of the location in
which the router is located
Service Provider or Sys-
Admin
Dial Out Pre-Fix
The digit required to be pre-fixed to allow
an external number to be dialed
Service Provider or Sys-
Admin
Length of the
Extensions
The length of the internal extension
numbers
Service Provider or Sys-
Admin
Email Profile Name
Profile to be used by the CallConnector
Operator to login to the email server
Sys-Admin
Email Password
Password used to log into your email
service
Sys-Admin
*Required for Standalone mode only
Table 3-1 CallConnector Operator Standalone Installation Parameters
Additional Information for the Server-Based Mode:
Item
Description
Source
Cisco CallConnector
Operator Server IP
Address
IP Address of the server computer
running the CallConnector Operator
server software
Sys-Admin
Login Name
Your CallConnector Operator user login
name as configured in the CallConnector
Server.
Sys-Admin
Login Password Password used to log into the
CallConnector server.
Sys-Admin
Table 3-2 Additional Installation Parameters For Server-Based Mode