Chapter 3 Installation and Configuration
3-16 CallConnector Operator
Once you have the license file:
• Click on the Browse button next to the License File Location textbox. A dialog will appear
allowing you to select the license file.
• Select the license file. Click on the Next button or press Enter to continue.
Entering user’s options:
The CallConnector Operator can operate in a Standalone mode with all the files on the
attendant’s PC or as a Client connected to the CallConnector Server mode using services
installed on another computer.
Standalone Mode:
In the standalone mode, the following information needs to be entered:
Local PC Network Adapter IP Address: In case you have multiple network cards on your local
computer, you need to specify the IP address you want to use to connect to the router.
Router IP Address: Enter the IP address of the Cisco Router that is providing the telephony
service for the attendant.
Figure 3-8 Select Network IP Address For CallConnector Operator Client Standalone
Country: Verify that the country location of the Cisco Router is correctly displayed; otherwise
select the country from the pull-down list.
To Next Page
Loading...
