Cisco vEdge Series User Manual

Table 29:
QuantityComponent
1Router chassis
2Multiband dipole antenna
1AC power cord appropriate for your geographical location (ferrite bead attached)
1USB console cable
1Wall-mount plate
1Quick Start document
Install the SIM Card Into the vEdge 100wm Router
Before you connect power to the vEdge 100wm router, you must install the SIM card that you received from
your carrier. The SIM card socket is located on the bottom of the vEdge 100wm chassis. See Figure 2.
Figure 2: SIM Card Socket
To install the SIM card into the SIM card holder:
1. Unscrew the SIM card socket cover and open it.
Figure 3: Opening the SIM Card Socket Cover
Hardware Installation Guide for vEdge Routers
97
vEdge 100wm Router
Install the vEdge 100wm Router

Cisco vEdge Series Specifications

General

Connectivity Technology	Wired
Virtualization Support	Yes
High Availability	Yes
QoS Support	Yes
Product Type	Router
Data Link Protocol	Ethernet
Routing Protocols	BGP, OSPF
Interfaces	Gigabit Ethernet
Operating System	Cisco vEdge OS
Security	IPSec
Management	CLI