Controlled Technologies
Viptela manages technology subject to the U.S. Export Administration Regulations (EAR). These controlled
technologies may include items under U.S. ECCN 5E002 encryption technology. The Viptela encryption
technology is for the development, production, and use of Viptela products that implement or use encryption.
The Viptela software distribution policy allows only authenticated users to download the Viptela encryption
software. Recipients of controlled technology are obliged to maintain adequate controls to prevent nationals
from outside the U.S. and Canada from accessing Viptela information, subject to ECCN5E002, without first
obtaining authorization from the U.S. government.
For additional information on controlled technologies, please contact Viptela support at support@viptela.com
.
Components and Specifications
This article provides the chassis specifications of the vEdge 2000 router and lists the other router components.
Chassis Specifications
Table 1 lists the specifications for the vEdge 2000 router chassis.
Table 1: vEdge 2000 Router Chassis Specifications
Table 50:
SpecificationItem
Services and Slot Density
4
Fixed SFP-based traffic ports (max 1 Gbps)
2Pluggable Interface Module (PIM) slots
YesEmbedded hardware-based crypto acceleration (IPSec)
8 GBMemory DDR3 ECC DRAM
Maximum capacity supported 32 GBSD card slot (external)
8 GBNAND storage (internal)
2External USB flash memory slots (Type A USB 3.0)
1USB console port (Type B default 115.2 Kbps)
1Serial console port (RJ-45 default 115.2 Kbps)
1Management Ethernet port (RJ-45 10/100/1000 Mbps)
Hot-swappable Power Supply Units (PSUs)Power supply option
Active–Active redundancyRedundant power supply support
Power Specifications
Hardware Installation Guide for vEdge Routers
161
vEdge 2000 Router
Components and Specifications
To Next Page
Loading...
Need help?
General
