Cisco vEdge Series User Manual

You can download the Windows driver here .
To use the USB console from a Macintosh device:
1. Install the USB serial drivers attached here .
2. Launch the Terminal utility.
3. From a terminal shell, access the console port with this command:
$ screen /dev/tty.usbserial* 115200,cs8
Maintenance and Troubleshooting
You can monitor and troubleshoot the vEdge 100wm router using the various LEDs and system alarms on
the router.
Alarm Severity Levels
The system alarms on the vEdge 100wm router have two severity levels:
Hardware Installation Guide for vEdge Routers
105
vEdge 100wm Router
Maintenance and Troubleshooting

Cisco vEdge Series Specifications

General

Connectivity Technology	Wired
Virtualization Support	Yes
High Availability	Yes
QoS Support	Yes
Product Type	Router
Data Link Protocol	Ethernet
Routing Protocols	BGP, OSPF
Interfaces	Gigabit Ethernet
Operating System	Cisco vEdge OS
Security	IPSec
Management	CLI