Cisco vEdge Series User Manual

PIM and Transceiver Modules
This article describes the Pluggable Interface Modules (PIMs) for the vEdge 2000 router as well as the SFP
and SFP+ transceivers for those PIMs.
PIMs for the vEdge 2000 Router
The vEdge 2000 router offers interface modularity, providing two PIM slots that support two types of PIMs:
• 8x1-Gigabit Ethernet SFP PIM (Model: PIM-8x1GE-SFP)
• 2x10-Gigabit Ethernet SFP+ PIM (Model: PIM-2x10GE-SFP+)
The two PIM slots are labeled PIM Slot 0 and PIM Slot 1.
Figure 1 and Figure 2 show the front panel of the 8x1-Gigabit Ethernet SFP PIM and the 2x10-Gigabit Ethernet
SFP+ PIM, respectively.
Figure 1: Front Panel of 8x1-Gigabit Ethernet SFP PIM
Figure 2: Front Panel of 2x10-Gigabit Ethernet SFP+ PIM
Hardware Installation Guide for vEdge Routers
165
vEdge 2000 Router
PIM and Transceiver Modules

Cisco vEdge Series Specifications

General

Connectivity Technology	Wired
Virtualization Support	Yes
High Availability	Yes
QoS Support	Yes
Product Type	Router
Data Link Protocol	Ethernet
Routing Protocols	BGP, OSPF
Interfaces	Gigabit Ethernet
Operating System	Cisco vEdge OS
Security	IPSec
Management	CLI