Cisco vEdge Series User Manual

SpecificationItem
420K hours
MTBF
Regulatory Compliance
AS/NZS 60950-1 CAN/CSA 60950-1
CB-IEC60950-1 CE Marking EN 60950-1
UL60950-1
Safety
AS/NZS CISPR22 Class A EN 300 386 EN 55022
Class A FCC Class A ICES Class A VCCI Class A
EMC
ROHS 6/6Environmental
Router Components
For a description of the vEdge 2000 router components, read these articles:
Front Panel Components Router Modules Ports and Connectors Power Supply and Cooling System
Field-Replaceable Units
Front Panel Components
This article describes the LEDs, reset button, and the SD card slot on the front panel of the vEdge 2000 router.
See At a Glance for the exact location of these components on the front panel of the router.
LEDs
The vEdge 2000 router has four chassis status LEDs located in the center of the front panel next to the USB
ports. See Figure 1.
Figure 1: Chassis Status LEDs in a vEdge 2000 Router
Table 1 describes the LEDs , their color and states, and the status they indicate.
Hardware Installation Guide for vEdge Routers
163
vEdge 2000 Router
Front Panel Components

Cisco vEdge Series Specifications

General

Connectivity Technology	Wired
Virtualization Support	Yes
High Availability	Yes
QoS Support	Yes
Product Type	Router
Data Link Protocol	Ethernet
Routing Protocols	BGP, OSPF
Interfaces	Gigabit Ethernet
Operating System	Cisco vEdge OS
Security	IPSec
Management	CLI