Cisco vEdge Series User Manual

DescriptionvEdge5000
Router
vEdge
2000
Router
vEdge
1000
Router
Viptela Part
Number
Manufacturer & Part
Number
• SFP transceiver
• LC-type connector
• Short-reach 850-nm optics over
multimode fiber for 1-Gbps
applications
XXXCisco-Finisar
FTLF8519P2BCL-C4
• SFP transceiver
• LC-type connector
• Short-reach 850-nm optics for
multi-mode fiber for 1-Gbps
applications
XXXSFP-1GE-SXFinisar
FTLF8519P3BNL
• SFP+ transceiver
• LC-type connector
• Short-reach 850-nm optics over
multimode fiber for 10-Gbps
applications
XXSFP+-10GE-SRFinisar
FTLX8574D3BCL
• SFP+ transceiver
• LC-type transceiver
• Short-reach 850-nm optics for
multi-mode fiber for dual-rate 1
Gbps/10 Gbps applications
Note : The SFP+ ports of the 10-Gigabit
Ethernet PIM support a rate of 10 Gbps
only. 1 Gbps is not supported.
XXFinisar
FTLX8571D3BCV
• SFP+ transceiver
• LC-type connector
• Long-reach 1310-nm optics for
single-mode fiber up to 10 km for
dual-rate 1 Gbps/10 Gbps applications
Note: The SFP+ ports on the 10-Gigabit
Ethernet PIM support a rate of 10 Gbps
only. 1 Gbps is not supported.
XXFinisar
FTLX1471D3BCV
Hardware Installation Guide for vEdge Routers
119
vEdge 1000 Router
Supported Transceivers

Cisco vEdge Series Specifications

General

Connectivity Technology	Wired
Virtualization Support	Yes
High Availability	Yes
QoS Support	Yes
Product Type	Router
Data Link Protocol	Ethernet
Routing Protocols	BGP, OSPF
Interfaces	Gigabit Ethernet
Operating System	Cisco vEdge OS
Security	IPSec
Management	CLI