Cisco vEdge Series - Page 174

Table 55:
ValueSpecificationEthernet Standard
SFP-1GE-Base-TModel Number1000 BASE-T
10/100/1000
Mbps
Rate
RJ-45Connector Type
N/AFiber Count
N/ATransmitter Wavelength
N/AMinimum Launch Power
N/AMaximum Launch Power
N/AMinimum Receiver
Sensitivity
N/AMaximum Input Power
CopperCable Type
100 m (328 ft)Distance
Not availableDOM Support
SFP-1GE-SX
Model Number1000 BASE-SX
1000 MbpsRate
LCConnector Type
DualFiber Count
850 nmTransmitter Wavelength
-9.5 dBmMinimum Launch Power
-3 dBmMaximum Launch Power
-21 dBmMinimum Receiver
Sensitivity
0 dBmMaximum Input Power
MMFFiber Type
220 m (721 ft) to 550 m (1804 ft) depending on fiber core
size/modal bandwidth specification
Distance
AvailableDOM Support
SFP-1GE-LX
Model Number1000 BASE-LX
Hardware Installation Guide for vEdge Routers
168
vEdge 2000 Router
PIM and Transceiver Modules