Contents
xx
Catalyst 3560 Switch Software Configuration Guide
78-16156-01
Limiting Syslog Messages Sent to the History Table and to SNMP 25-9
Configuring UNIX Syslog Servers 25-10
Logging Messages to a UNIX Syslog Daemon 25-10
Configuring the UNIX System Logging Facility 25-11
Displaying the Logging Configuration 25-12
CHAPTER
26 Configuring SNMP 26-1
Understanding SNMP 26-1
SNMP Versions 26-2
SNMP Manager Functions 26-3
SNMP Agent Functions 26-4
SNMP Community Strings 26-4
Using SNMP to Access MIB Variables 26-5
SNMP Notifications 26-5
SNMP ifIndex MIB Object Values 26-6
Configuring SNMP 26-6
Default SNMP Configuration 26-7
SNMP Configuration Guidelines 26-7
Disabling the SNMP Agent 26-8
Configuring Community Strings 26-8
Configuring SNMP Groups and Users 26-9
Configuring SNMP Notifications 26-11
Setting the Agent Contact and Location Information 26-14
Limiting TFTP Servers Used Through SNMP 26-15
SNMP Examples 26-15
Displaying SNMP Status 26-16
CHAPTER
27 Configuring Network Security with ACLs 27-1
Understanding ACLs 27-1
Supported ACLs 27-2
Port ACLs 27-3
Router ACLs 27-4
VLAN Maps 27-4
Handling Fragmented and Unfragmented Traffic 27-5
Configuring IP ACLs 27-6
Creating Standard and Extended IP ACLs 27-7
Access List Numbers 27-7
Creating a Numbered Standard ACL 27-8
Creating a Numbered Extended ACL 27-10
To Next Page
Loading...
