Contents
xxi
Catalyst 3560 Switch Software Configuration Guide
78-16156-01
Creating Named Standard and Extended ACLs 27-14
Using Time Ranges with ACLs 27-16
Including Comments in ACLs 27-18
Applying an IP ACL to a Terminal Line 27-18
Applying an IP ACL to an Interface 27-19
Hardware and Software Treatment of IP ACLs 27-21
IP ACL Configuration Examples 27-21
Numbered ACLs 27-23
Extended ACLs 27-23
Named ACLs 27-24
Time Range Applied to an IP ACL 27-24
Commented IP ACL Entries 27-25
ACL Logging 27-25
Creating Named MAC Extended ACLs 27-26
Applying a MAC ACL to a Layer 2 Interface 27-28
Configuring VLAN Maps 27-29
VLAN Map Configuration Guidelines 27-29
Creating a VLAN Map 27-30
Examples of ACLs and VLAN Maps 27-31
Applying a VLAN Map to a VLAN 27-33
Using VLAN Maps in Your Network 27-33
Wiring Closet Configuration 27-33
Denying Access to a Server on Another VLAN 27-35
Using VLAN Maps with Router ACLs 27-36
Guidelines 27-36
Examples of Router ACLs and VLAN Maps Applied to VLANs 27-37
ACLs and Switched Packets 27-37
ACLs and Bridged Packets 27-38
ACLs and Routed Packets 27-38
ACLs and Multicast Packets 27-39
Displaying ACL Configuration 27-40
CHAPTER
28 Configuring QoS 28-1
Understanding QoS 28-1
Basic QoS Model 28-3
Classification 28-4
Classification Based on QoS ACLs 28-7
Classification Based on Class Maps and Policy Maps 28-7
Policing and Marking 28-8
To Next Page
Loading...
