Contents
xxii
Catalyst 3560 Switch Software Configuration Guide
78-16156-01
Mapping Tables 28-10
Queueing and Scheduling Overview 28-11
Weighted Tail Drop 28-11
SRR Shaping and Sharing 28-12
Queueing and Scheduling on Ingress Queues 28-13
Queueing and Scheduling on Egress Queues 28-15
Packet Modification 28-17
Configuring Auto-QoS 28-18
Generated Auto-QoS Configuration 28-18
Effects of Auto-QoS on the Configuration 28-22
Auto-QoS Configuration Guidelines 28-22
Enabling Auto-QoS for VoIP 28-23
Auto-QoS Configuration Example 28-24
Displaying Auto-QoS Information 28-26
Configuring Standard QoS 28-26
Default Standard QoS Configuration 28-27
Default Ingress Queue Configuration 28-27
Default Egress Queue Configuration 28-28
Default Mapping Table Configuration 28-28
Standard QoS Configuration Guidelines 28-29
Enabling QoS Globally 28-30
Configuring Classification Using Port Trust States 28-30
Configuring the Trust State on Ports within the QoS Domain 28-31
Configuring the CoS Value for an Interface 28-33
Configuring a Trusted Boundary to Ensure Port Security 28-34
Configuring the DSCP Trust State on a Port Bordering Another QoS Domain 28-35
Configuring a QoS Policy 28-36
Classifying Traffic by Using ACLs 28-37
Classifying Traffic by Using Class Maps 28-40
Classifying, Policing, and Marking Traffic by Using Policy Maps 28-42
Classifying, Policing, and Marking Traffic by Using Aggregate Policers 28-45
Configuring DSCP Maps 28-47
Configuring the CoS-to-DSCP Map 28-47
Configuring the IP-Precedence-to-DSCP Map 28-48
Configuring the Policed-DSCP Map 28-49
Configuring the DSCP-to-CoS Map 28-50
Configuring the DSCP-to-DSCP-Mutation Map 28-51
To Next Page
Loading...
