CHAPTER
20-1
Catalyst 3560 Switch Software Configuration Guide
78-16156-01
20
Configuring Port-Based Traffic Control
This chapter describes how to configure the port-based traffic control features on the Catalyst 3560
switch.
Note For complete syntax and usage information for the commands used in this chapter, refer to the command
reference for this release.
This chapter consists of these sections:
• Configuring Storm Control, page 20-1
• Configuring Protected Ports, page 20-5
• Configuring Port Blocking, page 20-6
• Configuring Port Security, page 20-7
• Displaying Port-Based Traffic Control Settings, page 20-15
Configuring Storm Control
These sections include storm control configuration information and procedures:
• Understanding Storm Control, page 20-2
• Default Storm Control Configuration, page 20-3
• Enabling Storm Control, page 20-3
To Next Page
Loading...
Need help?
General