Cisco WS-C3560-48PS-S

16-23
Catalyst 3560 Switch Software Configuration Guide
78-16156-01
Chapter 16 Configuring MSTP
Displaying the MST Configuration and Status
Displaying the MST Configuration and Status
To display the spanning-tree status, use one or more of the privileged EXEC commands in Table 16-4:
For information about other keywords for the show spanning-tree privileged EXEC command, refer to
the command reference for this release.
Table 16-4 Commands for Displaying MST Status
Command Purpose
show spanning-tree mst configuration Displays the MST region configuration.
show spanning-tree mst instance-id Displays MST information for the specified instance.
show spanning-tree mst interface interface-id Displays MST information for the specified interface.