Contents
xxiii
Catalyst 3560 Switch Software Configuration Guide
78-16156-01
Configuring Ingress Queue Characteristics 28-52
Mapping DSCP or CoS Values to an Ingress Queue and Setting WTD Thresholds 28-53
Allocating Buffer Space Between the Ingress Queues 28-54
Allocating Bandwidth Between the Ingress Queues 28-55
Configuring the Ingress Priority Queue 28-56
Configuring Egress Queue Characteristics 28-57
Configuration Guidelines 28-57
Allocating Buffer Space to and Setting WTD Thresholds for an Egress Queue-Set 28-57
Mapping DSCP or CoS Values to an Egress Queue and to a Threshold ID 28-59
Configuring SRR Shaped Weights on Egress Queues 28-60
Configuring SRR Shared Weights on Egress Queues 28-62
Configuring the Egress Expedite Queue 28-63
Limiting the Bandwidth on an Egress Interface 28-63
Displaying Standard QoS Information 28-64
CHAPTER
29 Configuring EtherChannels 29-1
Understanding EtherChannels 29-1
EtherChannel Overview 29-2
Port-Channel Interfaces 29-3
Port Aggregation Protocol 29-4
PAgP Modes 29-4
PAgP Interaction with Other Features 29-5
Link Aggregation Control Protocol 29-5
LACP Modes 29-6
LACP Interaction with Other Features 29-6
Load Balancing and Forwarding Methods 29-6
Configuring EtherChannels 29-8
Default EtherChannel Configuration 29-9
EtherChannel Configuration Guidelines 29-9
Configuring Layer 2 EtherChannels 29-10
Configuring Layer 3 EtherChannels 29-12
Creating Port-Channel Logical Interfaces 29-12
Configuring the Physical Interfaces 29-13
Configuring EtherChannel Load Balancing 29-15
Configuring the PAgP Learn Method and Priority 29-16
Configuring LACP Hot-Standby Ports 29-17
Configuring the LACP System Priority 29-18
Configuring the LACP Port Priority 29-19
Displaying EtherChannel, PAgP, and LACP Status 29-20
To Next Page
Loading...
