Contents
xxvii
Catalyst 3560 Switch Software Configuration Guide
78-16156-01
Configuring a Rendezvous Point 32-11
Manually Assigning an RP to Multicast Groups 32-11
Configuring Auto-RP 32-13
Configuring PIMv2 BSR 32-17
Using Auto-RP and a BSR 32-21
Monitoring the RP Mapping Information 32-22
Troubleshooting PIMv1 and PIMv2 Interoperability Problems 32-22
Configuring Advanced PIM Features 32-22
Understanding PIM Shared Tree and Source Tree 32-22
Delaying the Use of PIM Shortest-Path Tree 32-24
Modifying the PIM Router-Query Message Interval 32-25
Configuring Optional IGMP Features 32-26
Default IGMP Configuration 32-26
Configuring the Switch as a Member of a Group 32-26
Controlling Access to IP Multicast Groups 32-27
Changing the IGMP Version 32-28
Modifying the IGMP Host-Query Message Interval 32-29
Changing the IGMP Query Timeout for IGMPv2 32-30
Changing the Maximum Query Response Time for IGMPv2 32-30
Configuring the Switch as a Statically Connected Member 32-31
Configuring Optional Multicast Routing Features 32-31
Enabling CGMP Server Support 32-32
Configuring sdr Listener Support 32-33
Enabling sdr Listener Support 32-33
Limiting How Long an sdr Cache Entry Exists 32-34
Configuring an IP Multicast Boundary 32-34
Configuring Basic DVMRP Interoperability Features 32-36
Configuring DVMRP Interoperability 32-36
Configuring a DVMRP Tunnel 32-38
Advertising Network 0.0.0.0 to DVMRP Neighbors 32-40
Responding to mrinfo Requests 32-41
Configuring Advanced DVMRP Interoperability Features 32-41
Enabling DVMRP Unicast Routing 32-42
Rejecting a DVMRP Nonpruning Neighbor 32-42
Controlling Route Exchanges 32-45
Limiting the Number of DVMRP Routes Advertised 32-45
Changing the DVMRP Route Threshold 32-45
Configuring a DVMRP Summary Address 32-46
To Next Page
Loading...
Need help?
General