Citrix ADC MPX
Danger: Some laser products contain an embedded Class 3A or Class 3B laser diode. Note the follow‑
ing:
• Laser radiation when open. Do not stare into the beam, do not view directly with optical instru‑
ments, and avoid direct exposure to the beam.
Statement 3:
Caution:
Never remove the cover on a power supply or any part that has the following label attached.
Hazardous voltage, current, and energy levels are present inside any component that has this label
attached. There are no serviceable parts inside these components. If you suspect a problem with one
of these parts, contact a service technician.
Statement 4:
Danger: Overloading a branch circuit is potentially a fire hazard and a shock hazard under certain
conditions. To avoid these hazards, ensure that your system electrical requirements do not exceed
branch circuit protection requirements. See the information that is provided with your device for
electrical specifications.
Statement 5 (applies to Citrix appliances with ‑48 VDC input):
Caution: This equipment is designed to permit the connection between the earthed conductor of
the DC supply circuit and the earthing conductor at the equipment. If this connection is made, the
following conditions must be met:
• This equipment must be connected directly to the DC supply system earthing electrode conduc‑
tor or to a bonding jumper from an earthing terminal bar or bus to which the DC supply system
earthing electrode conductor is connected.
• This equipment must be located in the same immediate area (such as, adjacent cabinets) as any
other equipment that has a connection between the earthed conductor of the same DC supply
circuit and the earthing conductor, and also the point of earthing of the DC system. The DC
system must not be earthed elsewhere.
• The DC supply source must be located within the same premises as this equipment.
© 1999–2023 Cloud Soware Group, Inc. All rights reserved. 126
To Next Page
Loading...
Need help?
General
