Clear-Com FreeSpeak Edge User Manual

FreeSpeak Edge | User Guide
Note: You cannot mix DHCP and static IP addressing on the IPT.
Note: The IP Transceiver must be connected and fully booted.
8. Enter the required static IP addresses for AES67 Admin and AES67 Audio.
Note: You cannot set static IP addresses that are within the Link Local range (169.254.0.0
to 169.254.255.255)
Note: You must set both the AES Admin and AES Audio IP addresses of the transceiver on
the same subnet with the same mask
Page 43

Clear-Com FreeSpeak Edge Specifications

General

Brand	Clear-Com
Model	FreeSpeak Edge
Category	Intercom System
Language	English