COBHAM AVIATOR 200 User Manual

Appendix A: 2-Wire Handset use
Operation 109
AAAA
2-Wire Handset use
Transfer a call with the 2-Wire Handset
You can receive a call on a 2-Wire Handset and transfer the call to another
handset.
To transfer a call do as follows:
1. When an incoming call is received, answer the call as usual with
I or
simply lift the handset from the cradle.
2. Place the call on hold with
F.
3. Dial the Interface Code of the desired handset, e.g.
K for Handset #2.
4. Initiate handset to handset call with
U.
You have now established an active call from handset to handset, and
you can give a short message.
5. Route the incoming call to the new handset by pressing
I, or placing
the handset in the cradle.
Redial a number
To call the last dialled number, first establish a connection by pressing I
or taking the handset off the cradle. Then press
D followed by U.
Mute the microphone of the 2-Wire Handset
To mute the microphone of the handset, press E. To return to normal
microphone function, press
E again.

COBHAM AVIATOR 200 Specifications

General

Brand	COBHAM
Model	AVIATOR 200
Category	Conference System
Language	English