Chapter 4: Advanced use
80 Start or stop any data session
Start or stop any data session
If necessary, you can start and stop any data session for all network user
groups connected to the system. To use this feature you must login as an
administrator.
To start or stop any data session, do as follows:
1. Select CONNECT.
If you are not yet logged in as an administrator, enter the administrator
user name and password. The default user name is admin and the
default password is 1234. If the password has been changed, contact
your system administrator.
Under ONGOING DATA SESSIONS at the top you can see which data
sessions are currently active and which are allowed.
Example:
In the example above you could manually start the streaming 128
connection of the GROUP 0 and stop the standard connection of the
DEFAULT GROUP.
2. Click on the session you want to start or stop.
To Next Page
Loading...
Need help?
General
