Chapter 3: Operate the system
38 Use a phone or fax machine
To select the incoming call type
This is typically set-up during initial configuration of the system.
To select which call types are accepted for an incoming call do as follows:
1. Access the web interface from a connected computer by opening a
browser and typing the address: http://192.168.0.1. The
DASHBOARD page is displayed.
2. For ISDN: Select the call type under SETTINGS > ISDN.
For Phone/Fax: Select the call type for each port under SETTINGS >
Phone/Fax.
For further information, see the AVIATOR 200/300/350 Installation and
maintenance manual.
Make or answer a phone call
Analog phone, ISDN phone or SIP-enabled IP
handset
There are different methods for activating a call, depending on the type of
phone:
• Analog phone or ISDN phone: Dial the number and press #.
• SIP-enabled IP handset: Dial the number and press the off-hook key.
To make a call
You have different options for making a call:
• Short Dial. If the number you want to call is in the phone book of the
system, you can use the Short Dial number. You find this number in the
web interface under PHONE BOOK, first column Entry.
Dial 00 <Short Dial> followed by # or off-hook key.
Example: To call entry number 4 in the phone book,
dial 004 followed by # or off-hook key.
To Next Page
