Chapter 3: Operate the system
Use a phone or fax machine 35
3333
Use a phone or fax machine
Available interfaces
Several types of voice equipment connect to the system:
Standard analog phone or G3 fax
1
machine: The system has two
phone interfaces for connecting standard analog phones or fax machines.
ISDN phone
1
or G4 fax machine
1
: The system has one ISDN interface
for connecting an ISDN phone or a fax machine.
SIP-enabled IP phone (smartphone): the system has an integrated SIP
server for connecting a SIP-enabled IP phone. For more details on setting up
and using a SIP-enabled IP phone see Use a SIP-enabled IP handset or
smartphone on page 51.
Check the cabin installation to locate the connectors for telephones and fax
machine.
For information on how to connect to the interfaces, see the AVIATOR
200/300/350 Installation and maintenance manual.
Select a call type
This is typically set up during initial configuration of the system.
The phone connection can use one of the following call types:
• Standard Voice: a low-tariff voice connection compressed to 4.0 kbps,
• 3.1 kHz Audio
1
: a high quality connection used for Premium Voice, G.3
fax or analog modem,
• UDI or RDI
1
(only on ISDN interface): used for G4 fax or data
The default setting for an AVIATOR 200/300/350 system is standard voice.
1. AVIATOR 200 with LGA (Class 15): This service is not available.
AVIATOR 300 with IGA (Class 7): The elevation angle must be larger than
45°.