Chapter 3: Operate the system
SMS service 59
3333
Configure message settings
To set up the default message options
You can set up general options for outgoing messages. These settings apply
by default to all outgoing messages. Note, however, that you can change
the Delivery notification setting for an individual message. For further
information, see To send an SMS message on page 53.
To set-up the default message options do as follows:
1. Select MESSAGES > Message settings from the left navigation pane.
2. If you want to include the original message when you reply, select Yes
next to Include message in reply.
3. Select whether or not you want Delivery notification for SMS
messages.
If you click Yes, the Status column in the Sent folder will show the status
of your message when it has been sent.
4. Click Apply.
To Next Page
Loading...
