EasyManuals Logo

COBHAM AVIATOR 200 User Manual

COBHAM AVIATOR 200
136 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
Chapter 1: Introduction
6 Services, features and interfaces
communication. The built-in PBX of the SBU can route VoIP calls that are
terminated in the SIP server of the SBU.
Tool for setup and use: The web interface
Use the built-in web interface of the
SwiftBroadband Unit (SBU) to access the system
settings. The web interface is accessed from a
computer connected to one of the LAN connectors
or using the WLAN interface of the SBU. The web
interface is shown in an Internet browser. No
additional installation of software is needed.
For further information on the web interface, see
Get to know the web interface on page 66.
Handsets
The following handsets are recommended by Cobham SATCOM.
AVIATOR Wireless Handset and Cradle
The AVIATOR Wireless Handset is used to
receive and make calls. The handset connects
to a wireless access point using Wireless Local
Area Networking (WLAN).
See the AVIATOR Wireless Handset and
Cradle, User Manual for a description of the
keys and LEDs of this handset and how to
make calls.

Table of Contents

Other manuals for COBHAM AVIATOR 200

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the COBHAM AVIATOR 200 and is the answer not in the manual?

COBHAM AVIATOR 200 Specifications

General IconGeneral
BrandCOBHAM
ModelAVIATOR 200
CategoryConference System
LanguageEnglish

Related product manuals