Chapter 2: Get started
Make the first call 21
2222
Example: If you are calling from the USA and the mobile number for
standard voice is 870772420567 on your system, and you
want to make a call to the system, dial 011 870 772420567.
Voice mail for SwiftBroadband
If a call to the AVIATOR 200/300/350 system is not answered the caller can
leave a voice mail message with Inmarsat’s voice mail service. Then an SMS
is sent to the AVIATOR 200/300/350 messaging system to alert you that
there is a voice mail message. For further details see To receive a voice mail
message on page 41.
Make a call from one AVIATOR system to another
To make a call from one system to another, press 00 <Mobile number>.
If you have connected a fax, make sure that the incoming call
type on that 2-wire interface is set to 3.1 kHz Audio. This is to
avoid that the fax rings and answers an incoming Standard call.
This is usually taken care of during initial configuration of the
system. See the AVIATOR 200/300/350 installation and
maintenance manual for further information.