Chapter 3: Operate the system
Use a phone or fax machine 37
3333
Example: To call Cobham SATCOM VA in USA that has the country code
1 and the phone number 7574639557, forcing the connection
to use Standard Voice, press 1* 00 1 7574639557 followed
by # if calling from an analog or ISDN phone.
Phone numbers for incoming 3.1 kHz Audio (Premium voice) and
Standard Voice
The two circuit-switched services 3.1 kHz Audio (Premium voice) and
Standard Voice have separate phone numbers. This way, a person calling a
phone connected to the system can select whether to use 3.1 kHz Audio
(Premium voice) or Standard Voice, simply by using the dedicated mobile
phone number. The phone numbers are listed in the documentation from
your service provider. Even though there are two phone numbers to call the
SwiftBroadband system only supports one circuit-switched call at a
time.
If the mobile phone numbers have been entered in the web interface they
are listed and you can look them up as follows:
1. Access the web interface from a connected computer, open a browser
and type the address: http://192.168.0.1 (default address). The
DASHBOARD page is displayed.
2. Select PHONE BOOK > Mobile numbers.
For further information, see View and edit the mobile numbers on page 76.
If the mobile numbers are not available in the web interface, refer to the
documentation from your airtime subscription.
For information on how to make a call to the system, see To make a call to
the system on page 40.
This will not change the default call type, only the type used for
this call.
The call type you are using must be selected in the web interface
(refer to the next section).
There are two Voice numbers, one for 3.1 kHz Audio and one for
Standard voice.
To Next Page
Loading...
