Chapter 4: Using the web interface
98-129217-D Administration 118
Antenna RF noise filter
The SAILOR FleetBroadband system has a built-in filter that makes it resilient to interference
from terrestrial mobile systems that operate inside the Inmarsat band and that may be located
near the coast.
To set up the Antenna RF noise filter, do as follows:
1. From the left navigation pane, select ADMINISTRATION > Antenna RF noise filter.
2. Select Auto, On or Off.
• Auto. The filter is automatically activated when the SAILOR FleetBroadband is
subjected to interference from terrestrial mobile systems.
• On. The filter is always active.
• Off. The filter is never active.
3. Click Apply.
We recommend leaving this setting as is (Auto). By default,
the filter is automatically activated when the
SAILOR FleetBroadband system is subjected to interference.
To Next Page
Loading...
