Chapter 3: Operating the system
98-129217-D Using a phone or fax machine 33
Transferring a call
When you receive a call, you can transfer this call to another phone connected to the terminal.
Thrane IP Handset:
Select Options > Transfer in the Thrane IP Handset. For further details, refer to the section
“Handling calls” in the user manual for the Thrane IP Handset.
Analogue 2-wire phones with R key:
Do as follows to transfer a call:
1. Press R 4 * <local number> #.
The phone with the local number you dialed starts to ring.
2. You now have two options.
• Hang up. The phone or headset you transferred the call to continues to ring. When the
call is answered, a connection is established between the initial caller and the new
recipient.
• Do not hang up. When the new recipient answers, you can have a conversation before
hanging up. When you hang up, the call is handed over to the initial caller.
Different types of phone have different methods/keys for the functions listed below.
If you have another type of phone than the ones listed below, refer to the
documentation for your phone/handset.
To Next Page
Loading...
