Using lists
2110 SSB Transceiver Reference Manual 97
Making changes to all other lists
The following steps can be used to make changes in every list except the Control List
(see page 96, Changing a setting in the Control List).
Creating an entry in a list
To create an entry in a list:
1 Select the list in which you want to create an entry.
1 Hold to open the List Manager.
1 Select Create entry.
The transceiver suggests a name for the new entry based on the name of the entry
you were on. For example:
1 Enter the name that you want to use for the new entry.
The name must be unique to the list that you are in.
1 Press .
The transceiver will prompt you to enter settings for the entry.
NOTE
In the following examples, you will need to log in as administrator to see
the lists (see page 110, Logging into admin level from user level).
NOTE For help with entering text see page 52, Entering and editing text.
For information on settings in the... See...
Channel List page 118
Network List page 123
NET List page 134
Phone Link List page 142
Address List page 147
To Next Page
Loading...
Need help?
General
