2110 SSB Transceiver compliance
2110 SSB Transceiver Reference Manual 15
European Radio and Telecommunications Terminal
Equipment Directive
The 2110 SSB Transceiver has been tested and complies with the following standards
and requirements (articles of the R&TTE Directive):
• Article 3.1b: ETSI EN 301 489-1
• Article 3.1b: ETSI EN 301 489-15
• Article 3.2: Australian type approval according to AZ/NZS 4770:2003
• Article 3.1a: assessed against ICNIRP requirements
• Article 3.1a: EN 60950
Compliance with these standards is deemed sufficient to fulfil the requirements of the
R&TTE Directive 1999/5/EC.
Product marking and labelling
Any equipment supplied by Codan that satisfies these requirements is identified by the
, , or markings on the model label of the product.
Declaration of Conformity and Expert Letter of Opinion
The CE Declaration of Conformity and Expert Letter of Opinion for this product is listed
on page 11, Associated documents. This document can be made available upon request to
Codan or a Codan-authorised supplier.
Protection of the radio spectrum
CAUTION
Most countries restrict the use of HF radio communications equipment to
certain frequency bands and/or require such equipment to be licensed. It is
the user’s responsibility to check the specific requirements with the
appropriate communications authorities. If necessary, contact Codan for
more information.
0191 0191
To Next Page
Loading...
Need help?
General
