Operating the transceiver
2110 SSB Transceiver Reference Manual 53
Figure 16: Editable screen showing slider
Editing a screen
To gain access to an editable screen:
1 Hold .
A question mark is displayed at the end of the heading to show that you can now
enter and/or edit text in the setting.
Entering text
To enter text in an editable screen:
1 To enter one of the letters on a key, press the key repeatedly until the letter is
displayed.
1 To enter another letter on the same key, wait until the cursor moves to the next
space...
NOTE
In the following example, you will need to log in as administrator to see
the Welcome Text entry in the Control List (see page 110, Logging into
admin level from user level).
NOTE
You can also hold the key until the letter you want is displayed, then
release the key.
To Next Page
Loading...
Need help?
General
