Operating the transceiver
2110 SSB Transceiver Reference Manual 75
Using hot keys
Hot keys on the front panel are keys that perform special tasks in addition to their normal
functions. Table 5 on page 30 lists the standard hot keys on the front panel and the tasks
you can perform with them.
Generally, pressing the hot key a second time will exit from the hot key activity. For
example, pressing CLAR allows the clarifier to be edited. Pressing CLAR again exits
the editing mode and returns you to the screen from which you began.
To use a hot key on any of the front panel keys:
1 Press the hot key.
The task is performed.
NOTE
If you want the user to be able to access an entry in the Control List so that
they can change the value, you should set up a hot key that accesses the
entry (see page 241, Creating a macro and assigning it to a hot key for
information on how to create hot keys).
NOTE
If the key can perform more than one hot key task, a list of the tasks is
displayed. Press the key repeatedly to scroll through the tasks. When
the task you want to perform is displayed, press .
NOTE
Some keys may require you to select a value from a list or enter text
before the task is completed.
To Next Page
Loading...
Need help?
General
