Codan 2110 User Manual

The 2110 SSB Transceiver
30 2110 SSB Transceiver Reference Manual
Hot keys
Hot keys enable you to perform a task quickly. The transceiver comes with some
standard hot keys programmed; the keys are labelled with the corresponding task
performed.
Table 5: Standard hot keys
Hot key Function
F1 Pressing F1 performs the macro assigned to this soft function key. By
default, MUTE is assigned to this key, so pressing F1 toggles mute on
or off.
F2 Pressing F2 performs the macro assigned to this soft function key. By
default, CALL is assigned to this key, so pressing F2 starts a call.
F3 Pressing F3 performs the macro assigned to this soft function key. By
default, SCAN is assigned to this key, so pressing F3 switches off
scanning, or if you were in a call, ends the call and switches scanning
on.
Hold MUTE Holding MUTE toggles the front panel speaker on or off.
TUNE Pressing TUNE displays the PTT tunes screen so you can manually
tune the antenna. For more information see page 77, Manual tuning.
CLAR Pressing CLAR enables you to adjust the receive frequency to
compensate for any frequency offset between your transceiver and the
remote transceiver. For more information see page 78, Using the
clarifier.
MODE Pressing MODE selects the next allowable mode programmed for the
channel, usually USB or LSB.
FREE Rx Pressing FREE Rx enters Free Tune mode in which you can adjust or
enter a receive frequency. For more information see page 232, Using
the transceiver in free tune.
Tx PWR Pressing Tx PWR toggles the transmission power of the transceiver
between Hi (25 W) and Lo (5 W).
V/S Pressing V/S toggles the mute type between Voice mute and Selcall
mute. For more information see page 61, Muting the transceiver.
SEC Pressing or holding SEC enters Secure mode, if the hardware option
is fitted, and special firmware is programmed into the transceiver and
enabled. For more information see page 80, Using the voice
encryptor.
GPS Pressing GPS displays your current GPS position, if the hardware
option is fitted and enabled. For more information see page 222, GPS
Screen entry.
EASITALK Pressing EASITALK toggles the DSP noise reduction algorithm on
or off. For more information see page 79, Reducing background noise
with Easitalk.

Codan 2110 Specifications

General

Brand	Codan
Model	2110
Category	Transceiver
Language	English