Using lists
116 2110 SSB Transceiver Reference Manual
Locking or unlocking an item at admin level
To lock or unlock a list, entry or setting at admin level:
1 Log into admin level if you have not already done so (for help see page 110,
Logging into admin level).
1 Go to the list, entry or setting you want to lock or unlock.
1 Hold to open the List Manager.
1 Select Admin...
1 Select Admin lock? or Admin unlock?
The item is locked or unlocked and the List Manager remains open.
Switching locks off or on at user level
If you need to edit a number of items that have been locked you may want to use the
locks off feature. This switches off all the locks set at the level into which you are
logged, so you do not have to unlock items individually. When you have edited the items
you can reinstate all the locks in one step using the locks on feature.
To switch locks off or on at user level:
1 Hold to open the List Manager.
1 Select Config...
1 To switch locks off select Locks off?
To switch locks on select Locks on?
The List Manager remains open.
NOTE
If you want to lock a group of entries in a list, make sure that the
entries in the list are grouped, then go to the name of the group you
want to lock. For more information on grouping entries see page 103,
Grouping and ungrouping entries.
NOTE
If you switch off the locks and switch off the transceiver, the locks are
automatically reinstated.
To Next Page
Loading...
Need help?
General
