coM.sat ISDN Basic
created: page: file:
16/01/09 60 coMsat ISDN Basic Manual V2.7.doc
Note Protection Mark according to DIN 34!
The data is updated after selecting Query in the Info menu on the menu bar.
Alternatively, you can use the following keyboard shortcuts:
<ALT> <I>
and
<Q>.
The state of the license for the extended functions of the ISDN Basic PRO is always
queried if this page is opened. This license enables the use of the functions statistics,
voice announcements, unconnected calls handling, call divcersion and SMS server.
This license is set the same way as in chapter 3.3.12.6 described for the virtual PBX,
see there.
In addition, a status text below the modem information informs the user if the device
is able to store voice announcements. It can show the message “Memory too small
for voice announcements”, “Memory size suitable for voice announcements” or
“Extended functions disabled”.
If licenses are stored in the device, their state is displayed at the bottom of the tab.
The above information can be read out and shown in text form by invoking ”In
Terminal” in menu ”Info”. Or the AT-command at$i can be entered directly into the
terminal window available in the "Terminal" tab. The module information is then
presented in the terminal window as shown in the following figure:
To Next Page
Loading...
Need help?
General