ComAp InteliDrive Lite Global Guide

ID-FLX Lite & Telecom Global Guide
96
Comm object 8252 Related applications
Description
The number of teeth on the engine gear for the pick-up sensor. The setpoint is ignored when ECU is
configured.
Note: The RPM pickup input is ignored when Engine params: Gear teeth = 0. The engine running state is
then detected based on Starting POil (page 111) or D+ function (page 119) = ENABLED.
6 back to List of setpoints

ComAp InteliDrive Lite Specifications

General

Brand	ComAp
Model	InteliDrive Lite
Category	Controller
Language	English