InteliLite4 AMF20 Global Guide
288
Dummy Load On Delay
Setpoint group Load Management Related FW 1.3.0
Range [units] 0.0 .. 600.0 [s]
Default value 15 s Alternative config YES
Step 0.1 s
Comm object 14506 Related applications AMF,MRS
Config level Advanced
Setpoint visibility If Dummy Load Active (page 287) is not set to disabled
Description
This setpoint determines delay after which additional Dummy Load Stage will be activated.
6 back to List of setpoints
Dummy Load Off
Setpoint group Load Management Related FW 1.3.0
Range [units] Dummy Load On (page 287) .. 200.0 [%]
Default value 50 % Alternative config YES
Step 0.1 %
Comm object 11773 Related applications AMF,MRS
Config level Advanced
Setpoint visibility If Dummy Load Active (page 287) is not set to disabled
Description
This setpoint determines power level which when exceeded will trigger Dummy Load Function to
remove/activate power bank stages (by deactivating additional Dummy Load Level LBOs).
6 back to List of setpoints
Dummy Load Off Delay
Setpoint group Load Management Related FW 1.3.0
Range [units] 0.0 .. 600. [s]
Default value 15 s Alternative config YES
Step 0.1 s
Comm object 14508 Related applications AMF,MRS
Config level Advanced
Setpoint visibility If Dummy Load Active (page 287) is not set to disabled
Description
This setpoint determines delay after which additional Dummy Load Stage will be deactivated.
6 back to List of setpoints
To Next Page
Loading...
Need help?
General
