InteliLite4 AMF20 Global Guide
291
DST Period Rule
Setpoint group Scheduler Related FW 1.3.0
Range [units]
AUSTRALIA, CHILE, EUROPE, MEXICO, NEW ZEALAND, PARAGUAY,
US/CANADA [-]
Default value AUSTRALIA Alternative config NO
Step [-]
Comm object 20251 Related applications AMF,MRS
Config level Standard
Setpoint visibility Only if DST Switching Mode (page 290) = AUTO
Description
Selection of the rule that will be applied for the calculation of the Daylight Saving Time (DST) validity
period.
DST Period Rule DST Validity period
EUROPE 01:00 GMT last Sunday in March – 01:00 GMT last Sunday in October.
US/CANADA 02:00 local time 2
nd
Sunday in March – 03:00 local time 1
st
Sunday in November.
MEXICO 02:00 local time 1
st
Sunday in April – 03:00 local time last Sunday in October.
AUSTRALIA 02:00 local time 1
st
Sunday in October – 03:00 local time 1
st
Sunday in April.
NEW ZEALAND 02:00 local time last Sunday in September – 03:00 local time 1
st
Sunday in April.
CHILE 00:00 local time 1
st
Sunday in September – 00:00 local time 1
st
Sunday in April.
PARAGUAY 00:00 local time 1
st
Sunday in October – 00:00 local time 4
th
Sunday in March.
6 back to List of setpoints
Time Mode
Setpoint group Scheduler Related FW 1.3.0
Range [units] - [STD / DST]
Default value STD Alternative config NO
Step [-]
Comm object 20249 Related applications AMF,MRS
Config level Standard
Setpoint visibility Only if DST Switching Mode (page 290) = MANUAL
Description
In manual DST Switching Mode (page 290) this input is used to adjust the actual time mode. In any other
DST Switching Mode (page 290) this input is not taken into account.
6 back to List of setpoints
To Next Page
Loading...
