InteliLite4 AMF20 Global Guide
363
SNMP Traps IP Address 2
Setpoint group CM-Ethernet Related FW 1.3.0
Range [units] Valid IP address [-]
Default value DISABLED Alternative config NO
Step [-]
Comm object 24094 Related applications AMF,MRS
Config level Standard
Setpoint visibility Only if relevant module is installed
Description
IP address 2 for receiving SNMP Traps. Leave this setpoint blank if SNMP traps should not be send.
6 back to List of setpoints
SNMP RD Community String
Setpoint group CM-Ethernet Related FW 1.3.0
Range [units] 0 .. 31 characters [-]
Default value public Alternative config NO
Step [-]
Comm object 23941 Related applications AMF,MRS
Config level Standard
Setpoint visibility
Only if relevant module is installed + conditioned by the setpoint SNMP Agent (page
362)
Description
SNMP Community String only for reading.
6 back to List of setpoints
SNMP WR Community String
Setpoint group CM-Ethernet Related FW 1.3.0
Range [units] 0..31 characters [-]
Default value private Alternative config NO
Step [-]
Comm object 23940 Related applications AMF,MRS
Config level Standard
Setpoint visibility
Only if relevant module is installed + conditioned by the setpoint SNMP Agent (page
362)
Description
SNMP Community String for writing and reading.
6 back to List of setpoints
To Next Page
Loading...
