InteliLite4 AMF20 Global Guide
371
Subgroup:NTP Settings
NTP Clock Synchronization
Setpoint group CM-Ethernet Related FW 1.3.0
Range [units] DISABLED / ENABLED [-]
Default value DISABLED Alternative config NO
Step [-]
Comm object 23934 Related applications AMF,MRS
Config level Standard
Setpoint visibility Only if relevant module is installed
Description
This setpoint is used to enable/disable controller time synchronization with exact time from an NTP server.
6 back to List of setpoints
NTP Server
Setpoint group CM-Ethernet Related FW 1.3.0
Range [units] [-]
Default value pool.ntp.org Alternative config NO
Step [-]
Comm object 23933 Related applications AMF,MRS
Config level Standard
Setpoint visibility Only if relevant module is installed
Description
NTP server address.
6 back to List of setpoints
To Next Page
Loading...
Need help?
General
