InteliLite4 AMF20 Global Guide
470
Related FW 1.3.0 Related applications AMF,MRS
Comm object 2152
Description
This output is active when ATT DPF Lamp is active.
ATT DPF Lamp
6 back to Logical binary outputs alphabetically
Related FW 1.3.0 Related applications AMF,MRS
Comm object 1373
Description
This output is closed if ECU send signal HEST Lamp. If ECU stop send HEST LAMP signal binary input
will be opened without no matter if alarms in alarmlist are confirmed or not.
ATT HEST Lamp
6 back to Logical binary outputs alphabetically
Related FW 1.3.0 Related applications AMF,MRS
Comm object 2155
Description
This output is active when ATT Inhibited Lamp is active.
ATT Inhibited Lamp
6 back to Logical binary outputs alphabetically
Related FW 1.3.0 Related applications AMF,MRS
Comm object
Description
This output is active when ATT Interlock Status is active.
ATT Interlock Status
6 back to Logical binary outputs alphabetically
Related FW 1.3.0 Related applications AMF,MRS
Comm object 2153
Description
This output is active when ATT SCR Error Lamp is active.
ATT SCR Error Lamp
6 back to Logical binary outputs alphabetically
Related FW 1.3.0 Related applications AMF,MRS
Comm object 2231
Description
This LBO is active when the engine requires to confirm the start of aftertreatment regeneration.
Note: LBO is required in Yanmar engine types
ATT Regen ACK Lamp
6 back to Logical binary outputs alphabetically
To Next Page
Loading...
