InteliLite4 AMF20 Global Guide
469
Related FW 1.3.0 Related applications AMF,MRS
Comm object 2212
Description
Alarm is active when Wrn Maintenance Timer 2 RunHours (page 538) or BOC Maintenance Timer 2
RunHours (page 573) or Wrn Maintenance Timer 2 Interval (page 538) or BOC Maintenance Timer
2 Interval (page 574) is active.
AL Maintenance 2
6 back to Logical binary outputs alphabetically
Related FW 1.3.0 Related applications AMF,MRS
Comm object 2213
Description
Alarm is active when Wrn Maintenance Timer 3 RunHours (page 538) or BOC Maintenance Timer 3
RunHours (page 574) or Wrn Maintenance Timer 3 Interval (page 539) or BOC Maintenance Timer
3 Interval (page 574) is active.
AL Maintenance 3
6 back to Logical binary outputs alphabetically
Related FW 1.3.0 Related applications AMF,MRS
Comm object 109
Description
This output is active when the BOC Overcurrent IDMT (page 573) or BOC Short Circuit (page 572)
alarm is present in alarmlist or isn't confirm.
AL Overcurrent
6 back to Logical binary outputs alphabetically
Related FW 1.3.0 Related applications AMF,MRS
Comm object 2
Description
The output is designed to be used as external alarm indication such as a red bulb in the control room etc.
The output is active when at least one unconfirmed alarm is present in the alarmlist and remains active
until confirmation of alarm.
Alarm
6 back to Logical binary outputs alphabetically
Related FW 1.3.0 Related applications AMF,MRS
Comm object 2154
Description
This output is active when ATT DEF Level Lamp is active.
ATT DEF Level Lamp
6 back to Logical binary outputs alphabetically
To Next Page
Loading...
