InteliLite4 AMF20 Global Guide
538
256) (unit is hours-h) and it counts down in hours while engine is running.
Setpoint Maintenance Timer 1 Protection (page 257) has to be set to: Warning
6 back to List of alarms level 1
Alarm Type WRN
Alarmlist message Wrn Maintenance Timer 1 Interval
Alarm evaluated All the time
Related applications AMF,MRS
Description
The alarm is active when the value Maintenance Timer 1 Interval (page 413)
Interval reaches 0.
The value is adjustable by setpoint Maintenance Timer 1 Interval (page 256)
(unit is in months-m) and it counts down in days based on actual date (No matter
if engine is running or not). Setpoint Maintenance Timer 1 Protection (page
257) has to be set to: Warning
Wrn Maintenance Timer 1 Interval
6 back to List of alarms level 1
Alarm Type WRN
Alarmlist message Wrn Maintenance Timer 2 RunHours
Alarm evaluated All the time
Related applications AMF,MRS
Description
The alarm is active when the value Maintenance Timer 2 RunHours (page
413) reaches 0.
The value is adjustable by setpoint Maintenance Timer 2 RunHours (page
257) (unit is hours-h) and it counts down in hours while engine is running.
Setpoint Maintenance Timer 2 Protection (page 258) has to be set to: Warning
Wrn Maintenance Timer 2 RunHours
6 back to List of alarms level 1
Alarm Type WRN
Alarmlist message Wrn Maintenance Timer 2 Interval
Alarm evaluated All the time
Related applications AMF,MRS
Description
The alarm is active when the value Maintenance Timer 2 Interval (page 413)
reaches 0.
The value is adjustable by setpoint Maintenance Timer 2 Interval (page 258)
(unit is in months-m) and it counts down in days based on actual date (No matter
if engine is running or not). Setpoint Maintenance Timer 2 Protection (page
258) has to be set to: Warning
Wrn Maintenance Timer 2 Interval
6 back to List of alarms level 1
Alarm Type WRN
Wrn Maintenance Timer 3 RunHours
To Next Page
Loading...
Need help?
General
